Universal Super Slim, Adjustable Tilt PLASMA and LCD mount
Super Slim/ Flush Adjustable Tilt Plasma, LCD, LED TV Wall mount
UniversalMounts universal Tilt wall mounts will work with most Plasma TV screen and LCD screens from 37" to 70". The super Flush Tilt design is easy to install and remove.
All necessary hardware is included for different wall types. Horizontal and vertical position adjustments allow perfect positioning of the screen regardless of the distance of wall studs.
- Your screen will be only 1.65" from the wall (most other Tilt Mounts are 2.5" to 3" from the wall)
- Adjustable Easy Tilt provides 0° to +12° angle of viewing
- Fits most 37", 40", 42", 46", 50", 55", 58", 65" PLASMA (see note below)
- Fits most LCD, LED tv up to 70"
- Supports up to 150 lbs
- Solid heavy-gauge steel construction
- Wide open Back Plate for all wire installations
- Easy to install with 31" back plate to support up to 2 studs (most mounts are only 28")
- TV can slide left to right on the 31" back plate, allowing you to center the TV on the wall from 3" to 12"
- Supports up to 28.5" (730mm H) x 19.5" (500mm V) TV back Hole pattern
Compatibility: This universal wall-mount bracket is designed to fit flat-panel plasma and LCD screens from 37" to 70". The TV can have a maximum weight of 150 pounds.
Does not support older Pioneer 60" or older Panasonic 65" Plasma prior to April 2010
Construction: The bracket is constructed of heavy-gauge steel. Uses 2mm steel. Very heavy duty mount.
Mounting: The wall plate must be anchored directly to wall studs using the supplied lag bolts. The slots in the wall plate can accommodate a variety of stud spacing, allowing you to easily mount the TV to wall studs that are 16" or 24" on center. Once the wall plate is anchored to the wall studs and the TV rails (with the TV attached) are hooked onto the wall plate, the TV can slide left to right, allowing you to center the TV on the wall. After the TV is secured, it will be held approximately 1.65" from the wall.
Security: The rails can be locked in position by 2 screws on the bottom of each rail. Preventing the Tv from accidental move or for security reasons.
TV Hole patterns Supported:
Horizontal 4" to 28.5" 100---730 mm
Vertical 4" to 19.5" 100---500 mm
WHAT’S IN THE PRODUCT’S BOX?
- 31" wide Back Wall plate
- 2 Tilt TV rails, 21" long each
- All necessary Screws for Wood Stud installation